Wholesale Argon compressor manufacturers take you to understand the usage precautions of Argon
Storage method. Wholesale Argon compressor manufacturer tells you that argon gas can be stored and transported in liquid form at temperatures below -184°C, but argon gas for welding is mostly used in steel cylinders. Wholesale Argon compressor manufacturer tells you that an argon gas cylinder is a cylindrical, high-pressure steel container painted grey and marked with a green "Argon" logo.
Wholesale Argon compressor manufacturer tells you that argon cylinders are strictly prohibited from knocking, colliding, and when the cylinder valve is frozen, do not use fire to bake; do not use electromagnetic lifting and transporters to transport argon cylinders; in summer, prevent sunlight exposure; If the gas cannot be used up, the residual pressure of the argon cylinder returned to the factory should not be less than 0.2MPa; the argon cylinder is generally placed upright.
First-aid. Wholesale Argon compressor manufacturer tells you that in case of inhalation of argon gas, personnel should quickly leave the site for fresh air. Keep the airway open. If breathing is difficult, give oxygen. breathe. If the heart stops, perform CPR immediately, then seek medical attention.
Skin contact with argon has occurred. Wholesale Argon compressor manufacturer tells you that if frostbite occurs, soak the affected area in warm water maintained at 38~42℃ to rewarm, do not rub, and do not use hot water or radiant heat. Wrap with a clean, dry dressing and seek medical attention.
The above information is the Wholesale Argon compressor manufacturer's introduction and analysis of the usage precautions of Argon, hope it helps you.