China natural gas compressor on sales failure precautions
The possible failure reasons for China natural gas compressors on sales mainly include non-compliance with operation rules, design defects, parts problems, and installation inspection quality that does not meet the requirements. The main reason for the failure of China natural gas compressors on sales is that the operation does not follow the rules and the problems occur after the parts are worn out.
Problems that are likely to occur when operating China natural gas compressors on sales: 1. Failure to check whether the externally visible fasteners such as screws are tightened. 2. Whether there are problems such as peculiar smells and air leakage. 3. Check whether the power supply and parameters are in normal operation according to the rules.
Parts problems: 1. Check whether the main parts are corroded or severely worn. If so, please contact the manufacturer in time and pay attention to replacement to avoid machine failure or wear. 2. When checking and replacing the engine oil or lubricating oil, pay attention to check whether there is any problem with the parts or whether the engine oil or lubricating oil is too dirty or has a poor cooling effect. If there is, please pay attention to replacing it.
3. Pay attention to checking the valve plate, valve spring, and other vulnerable parts of China natural gas compressors on sales, because these parts are easy to wear and are not easy to detect. It is more likely to cause some small problems in the machine of China natural gas compressor on sales, but if it is not processed for a long time, it will cause bigger problems.
Through the above introduction and analysis of China natural gas compressor on sales failure precautions, hope it helps you.