Faults and analysis of Quality hydrogen compressor in china
Quality hydrogen compressor in China requires high manufacturing precision and maintenance. When a Quality hydrogen compressor in China is driven by a motor, the crankshaft rotates rapidly and reciprocates. One end of the crankshaft and connecting rod is connected with the crosshead part, and the crosshead part also reciprocates in the slideway under the action of the crankshaft connecting rod, and finally drives the piston to reciprocate, realizing the hydrogen (or hydrogen-containing mixture) compression.
However, during the long-term reciprocating motion of the crankshaft, connecting rod, and crosshead components of the Quality hydrogen compressor in china, these components are prone to wear and tear. Once serious wear occurs, it will affect its operating quality. It needs to be found in time and shut down for maintenance to ensure The safe and stable operation of the compressor.
The most common problem with the lubricating oil system of Quality hydrogen compressors in china is low lubricating oil pressure. When the Quality hydrogen compressor in china is running normally, the lubricating oil is pressurized by the oil pump and sent to the first-stage filter, and after passing through the external lubricating oil cooler and the second-stage filter in turn, it is divided into 3 routes. The first line goes to the oil pressure gauge of the compressor (including remote instruments and on-site instruments); the second line reaches the small bushing of the big head tile to provide lubrication; the third line reaches the compensation pump to prevent oil leakage from the oil pressure limiter.