07
2023
-
03
China Circulating compressor on sales
Author:
China Circulating compressor on sales The fuselages of the two columns are symmetrical to each other. The difference between the left fuselage and the right fuselage of the China Circulating compressor on sales is that the former has a gear oil pump boss, and the oil pump is the movement mechanism of the lubricating machine. The fuselage is bayonet-type with 500mm cylindrical slides and 420mm main bearings.
The main bearing of the China Circulating compressor on sales is composed of 4 bearing bushes. The side bearing shell is clamped with a wedge iron to adjust the wear amount of the bearing. The crank-connecting rod mechanism is composed of the following components: (1) 2 cranks mounted directly on the main shaft of the compressor; (2) 2 closed connecting rods and wedge iron clamping bearing bushes; (3) 2 A closed cross with sliding shoes.
The piston rod of the China Circulating compressor on sales is connected with the cross head by coupling. The crank and connecting rod are connected by a connecting rod big end bearing mounted on the crank ring. The bearing is composed of two steel bearing bushes; the bearing bushes are cast with 6-83 or 6-16 Babbitt alloy and clamped with wedge iron. The connecting rod and crosshead are connected with a small connecting rod bearing located on the crosshead pin. The bearing consists of two steel tiles poured with 6-83 or B-16 Babbitt alloy and clamped with wedge iron.
Related News
CONTACT
Add: No. 5, Huangshan Industrial Park, High-tech Zone, Bengbu City, Anhui Province
Tel: 86-552-4111699
E-mail: aotcompressor@ gmail.com
Mobile Edition
Copyright © 2021 Bengbu AOT Compressor Co., Ltd. Anhui ICP No. 10015809 Powered by 300.cn seo