
09
2023
-
03
Steps to Buy Circulating compressor Manufacturers china
Author:
Buy Circulating compressor Manufacturers china after installation, overhaul, or parking, the cylinder should be replaced with nitrogen before driving. In order to avoid the cylinder, piston rod and stuffing box of Buy Circulating compressor Manufacturers china from scratching and burning out, the cylinder and stuffing box should be filled with oil before starting. Cannot drive with the load.
The driving steps of Buy Circulating compressor Manufacturers china are rough as follows: 1. Contact the relevant posts and electrical personnel to send electricity. 2. Thoroughly check the motor and moving parts to make sure there is nothing extraneous near the moving parts. 3. Open the auxiliary valve and cooling water valve of the circulator, and close the inlet and outlet valves and vent valve of the circulator. 4. Check the oil level of the oil injector and the crankcase, and add oil to the required oil level. 5. Turn on the machine.
When the following emergencies occur, the vehicle should be stopped: 1. When a large amount of gas leakage, rupture, or fire is found in the gas pipeline. 2. When the motor temperature exceeds 800°C. 3. When the individual parts of Buy Circulating compressor Manufacturers china are damaged, and the cylinder or other assemblies are damaged by cracks. 4. When the oil injector is damaged.
The emergency stop steps are rough as follows: (1) Quickly press the stop button to stop the Buy Circulating compressor Manufacturers china from running. (2) Contact the synthesis section quickly to maintain system pressure and catalyst temperature. Then close the inlet and outlet valves, open the auxiliary valve and the cylinder vent valve, and release the pressure in the cylinder.
Related News