图片名称

10

2023

-

03

The main points of the normal operation of Wholesale Circulating compressors in China

Author:



1. Frequent patrol inspection, pay attention to motor current, the pressure difference between inlet and outlet, and lubrication. Ensure that the working pressure of the Wholesale Circulating compressor in China is not greater than 320 kg/cm2, and the pressure difference between the inlet and outlet is not greater than 35 kg/cm2. At the same time, ensure that the circulating lubricating oil pressure of the Wholesale Circulating compressor in China is between 1.5 and 3 kg/cm2, the bearing temperature is not higher than 60°C, the temperature of the front and rear stuffing boxes is not higher than 60°C, and the slideway temperature is not higher than 60°C.

Wholesale Circulating compressors in China2. Be good at mastering the operation methods of seeing, listening, and touching during the operation. Use the method of inspection to judge whether the parts of transmission parts are loose and fallen off, and whether the friction parts are in good condition. At the same time, you can also see a load of the Wholesale Circulating compressor in China from the current and pressure difference, and the amount of oil. out of lubrication. The operation of the circulating compressor can be judged more accurately by listening.
Because when the Wholesale Circulating compressor in China is in normal operation, its sound is uniform and rhythmic. If its sound loses rhythm and uneven noise appears, it means that the internal parts have failed. The method of touching can detect whether the temperature of each transmission friction part is overheated.
It must be explained that the above methods of seeing, listening, and touching are not isolated, but are closely related and mutually confirmed. 3. Strictly prevent methanol from entering the cylinder. During operation, you must be good at detecting the liquid phenomenon in time through the current of the Wholesale Circulating compressor in China, the increase of the pressure difference, and the decrease of the cylinder temperature, and deal with it in time.