Failure analysis of china reciprocating compressor near me
China reciprocating compressor near me plays an important role in increasing the pressure in most technological processes, but due to its complex working conditions and many wearing parts, the failure rate is higher than that of centrifugal compressors. Its daily operation management and fault analysis standards are high, and the difficulty is not as simple as people think. Reducing the failure rate of the china reciprocating compressor near me and improving the operation efficiency is an important means to reduce the energy consumption of the device.
1. The packing of the china reciprocating compressor near me is a common fault. The friction and wear between the piston rod and the packing are serious. There are powdery deposits in the filler. The packing ring is tight, and the spring fails or breaks. Causes seal failure, which is also the main reason for seal failure.
2. The process medium of the china reciprocating compressor near me entrains particulate matter. Field inspections sometimes reveal large deposits in compressor cylinders and packing seal cavities. These deposits are composed of fine solid dust or coked carbon particles entrained by the process medium and tend to be very hard.
Its deposition in the sealing cavity of the china reciprocating compressor near me will inevitably cause serious wear and tear of the sealing packing, thereby greatly shortening the service life of the packing, sealing ring, and piston rod. By adjusting the process to make the compressor parameters meet the design requirements, if necessary, a gas-solid separator can be added to separate these particles and debris, and the particle wear between the cylinder and the piston ring, the piston rod, and the packing friction pair can be avoided.
Through the above introduction and analysis of the Failure analysis of china reciprocating compressor near me, hope it helps you.