Introduction of Hydrogen Sulfide Compressor
This article will introduce the working principle and classification of Hydrogen Sulfide Compressor.
High-pressure compressor is a type of compressor classified by pressure, and the exhaust pressure is 100-1000MPa. Its models are available in piston, membrane, screw and centrifugal compressors. Generally used as petroleum gas, natural gas, oilfield gas compressors in petrochemical industry, hydrogen compressors in oil hydrorefining, air and oxygen compressors in air separation, ethylene, propylene, propane, coke oven gas, Nitrogen, ammonia, Hydrogen Sulfide Compressor and other process compressors.
Compressor and Hydrogen Sulfide Compressor, a driven fluid machine that lifts low-pressure gas to high-pressure gas, is the heart of the refrigeration system. The Hydrogen Sulfide Compressor inhales low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and discharges the high-temperature and high-pressure refrigerant gas to the exhaust pipe to provide power for the refrigeration cycle.
So as to realize the refrigeration cycle of compression→condensation (heat release)→expansion→evaporation (heat absorption). Compressors and Hydrogen Sulfide Compressor are divided into piston compressors, screw compressors, centrifugal compressors, linear compressors, etc.
Through the above introduction and analysis of Hydrogen Sulfide Compressor, hope it helps you.