18
2022
-
04
Installation requirements of a Hydrogen Sulfide Compressor
Author:
This article will introduce the installation requirements of the Hydrogen Sulfide Compressor.
1. Requires a spacious and well-lit place, which is conducive to the operation and maintenance of the Hydrogen Sulfide Compressor.
2. The relative humidity of the air should be low, the dust should be less, and the air should be clean and well ventilated.
3. The ambient temperature must be lower than 40°C, because the higher the ambient temperature, the less air the Hydrogen Sulfide Compressor can output.
4. If the factory environment is poor and dusty, it is necessary to install a pre-filtering device on the Hydrogen Sulfide Compressor.
5. Reserve a passageway, and those who meet the conditions can install a crane to facilitate the maintenance of the Hydrogen Sulfide Compressor.
6. Reserve maintenance space, and the distance between the Hydrogen Sulfide Compressor and the wall must be at least 70 cm.
7. The Hydrogen Sulfide Compressor is at least one meter away from the headspace.
8. Install explosion-proof devices such as walls.
Through the above introduction and analysis of Hydrogen Sulfide Compressor, hope it helps you.
Related News
CONTACT
Add: No. 5, Huangshan Industrial Park, High-tech Zone, Bengbu City, Anhui Province
Tel: 86-552-4111699
E-mail: aotcompressor@ gmail.com
Mobile Edition
Copyright © 2021 Bengbu AOT Compressor Co., Ltd. Anhui ICP No. 10015809 Powered by 300.cn seo