1. The cylinder clearance volume of the acetylene compressor is too large, which will reduce the suction volume. Elimination method: adjust the cylinder clearance packing or piston rod wear caused by leakage. Repair or replace the seal or piston rod. Insufficient supply of lubricating oil reduces air tightness and causes leakage. Elimination method: disassemble and inspect the suction and exhaust valves, and find that the valve is short of oil, and the amount of lubricating oil should be increased.
The gas enters the compressor from the intake pipe through the system valve, and after being compressed by the Acetylene compressor, it is discharged into the gas-liquid separator through the exhaust communication pipe, and then discharged through the gas-liquid separator. After the gas-liquid mixture discharged from the Acetylene compressor is separated in the gas-liquid separator, the gas is sent to the system that needs to compress the gas through the valve, and the working fluid is left in the gas-liquid separator. The working fluid in the compressor is supplied by the gas-liquid separator.
(1) First, check whether the pressure gauges, thermometers, ammeters, voltmeters and other measuring instruments of the Acetylene compressor are complete and intact, and whether the calibration time of the acetylene compressor is exceeded.
An acetylene compressor is a machine that compresses the gas to increase gas pressure or transport gas. It is called a compressor, also called a compressor and a compressor. All kinds of compressors belong to power machinery, which can reduce the volume of gas and increase the pressure, and have a certain kinetic energy. Second, it can be used as mechanical power or for other purposes. According to the compressed gas, it is called air compressor, acetylene compressor, oxygen compressor, ammonia compressor, gas compressor, etc.
Acetylene compressor manufacturers tell you that the main varieties of acetylene generators include the following types: Body structure: single row, double row; cooling method: jacket type, water jacket type; cylinder form: angle type (V type), vertical type (Z type) ), horizontal (D type); speed adjustment: single-speed, two-speed, multi-speed, stepless speed change; suction pressure: normal pressure intake, pressurized intake; control mode: ordinary control, frequency conversion control, programmable Centralized control.